Technology-Paper thin stone
Biggest size：1mm(1600*3200mm）2.8kg/㎡ 3mm(2000*3200mm）7.5kg/㎡ 5mm(2000*3200mm）12kg/㎡
Applications
Wall, floor, ceiling, door, furniture surface, decorative lighting etc
Stone surface treatment
Polished/honed/antiqued
Material Requirements
The variety and specifications of ultra-thin marble panels should conform to the design requirements, technical grades, glossiness, and appearance quality requirements, and comply with the provisions of national standards.
Construction tools
Spirit level, leveling ruler, ink marker, steel measuring tape, nylon thread, rubber hammer (or wooden hammer), cutting machine, grinding machine.
Ultra-thin Stone
Natural stone + Glue + Fiberglass
Adhesive
Neutral silicone structural adhesive (or composite adhesive, dry-hanging AB adhesive, all-purpose adhesive), glue gun, marble adhesive
Construction conditions
-
After the ultra-thin marble panels are delivered to the site, they should be stacked upright indoors with the polished surface facing each other, supported by pine wooden strips on the back, and padded with wooden blocks underneath. Careful inspection should be conducted to verify whether the variety, specifications, quantity, etc., meet the design requirements. Panels with obvious cracks, missing edges, chipping, or surface defects should be removed.
-
​The indoor walls, ceiling base (woodworking boards, aluminum veneers, stainless steel plates, galvanized iron sheets), electrical pipes embedded in the base and pipelines penetrating the ground have all been completed.
-
Snap the +50cm horizontal line on the walls around the room.
-
Before construction operations, a detailed drawing of laying the marble wall and ceiling installation should be drafted.
Ultra-thin stone ceiling and background wall pasting method
1-2mm ultra-thin stone pasting method
